TS-5 Dehydration and Rust Preventive Oil
I Purpose:
　　 TS-5 can remove moisture on the surface of workpieces under room temperature with dehydration and rust preventive function and it can keep more than two months rust preventive period. Moreover, it fits for dehydration to prevent rust in the process of processing, surface treatment, sand blasting, thermal treatment, chemical rust preventive technique and cleaning procedure for steel and cast iron. This product can simplify the rust preventive technique, enhance rust preventive quality, save the energy; at same time, it can be used with 901 and F-35 rust preventive oil to make long term oil seal.

II Product Standard（Q3201·NJH·010-95）:
Item
Index
1.Appearance
brownish red transparent oil type liquid
2.Substitution Property of Water
Without rust, without grime
3.Damp Heat Test, 5d, 45＃steel not higher than
A
4.corrosion test, 5d, 45＃steel not higher than
0
5.lamination test 5d, 45＃steel not higher than
0
6.Substitution 45＃ Property of sweat
Without rust
 
     
  III Method of Application:
　　1.The metal products should be put into surfactant then they can be put into the dehydrated oil; thermal treatment scrap salt and abrasive paste should be cleaned in the cleaning agent, then they can be put into the dehydrated oil after being washed. The immerging period should be one minute and the parts should be swayed at intervals. As for those parts with small opening and foramen cecum, they should be turned over and swayed so that the dehydration can be completely carried out..
　　2.Bottom of the oilcan must be designed into taper type with valve so that cleaning agent and infectant at the bottom can be periodically removed. Mobile net type or multi-hole disc should be equipped from 50 to 100mm away from water of the groove.
  
     
  IV Packing:
　　1.Packing, mark, storage, transportation, mixing, check and accept are all carried out according to SH0164.
　　2.Packing: 160kg galvanized barrel